Filling the Clearomizer
Hold your Vape02 upside down. Unscrew the Protank base from the Protank body. Continue to hold the body upside down, aim the tip of your e-liquid bottle down the side and carefully squeeze until you have reached the required level of liquid.
Then screw the Protank base back to the body NOTE: DO NOT fill the central tube of your Protank as the liquid will then leak out of the mouth piece.
When opening the Protank to refill, hold your Vape02 upside down as to avoid spilling any excess e-liquid.
Screw the Protank onto the battery.
Press and hold the button on the battery down to activate the device.
An LED behind the button will illuminate to show that the device is turned on. If the LED flashes during operation, this means that the battery needs to be recharged.
Locking the Device
To lock the device, click the power button 5 times. To unlock the device, click the power button again 5 times.
Gently unscrew the battery from the Protank and screw the battery into the USB charger.
Once attached, insert the USB charger into any powered USB port. The charging indicator displays a red light to show that charging has begun; this will then turn green when the battery is fully charged.
Charging must be carried out in normal room temperature (0 degrees C to 40 degrees C) NOTE: When unscrewing the battery from the Protank, hold the Protank base with one hand and unscrew the battery with the other. If you do not hold the Protank base, there is a chance that you could unscrew the base from the Protank body instead of the battery. This will cause any e-liquid in the Protank body to pour out.
NOTE: Do NOT use the USB port in your phone charger or leave your device charging unattended overnight.